2009 Mercedes-Benz SL63 AMG

Another eagerly awaited car bowing at the Geneva show is the all-new Mercedes- Benz SL63 high-performance roadster.

This AMG-built 6.3-liter V-8 powerplant should produce in excess of 500 horsepower and will most likely be mated to Mercedes’ 7-speed automatic transmission featuring AMG Speedshift steering wheel-mounted paddle shifters.

Highlights to the latest iteration of this venerable German top-down two-door SL-Class include a sportier, new-look front fascia and hood, McLaren SLR-style side vents, a restyled cabin, and Airscarf – a head and neck warming system integrated into the headrests to allow for more top-down touring in the cooler seasons.

But this classy yet athletic-looking machine gets an even more aggressive look for the SL63 model. Lightweight 5-spoke alloys are shod with large-diameter, low- profile performance rubber for improved handling. And that aforementioned “fish gille”-styled side vent on the standard car is replaced by a larger, sturdier- looking one piece appliqué featuring bold “6.3 AMG” scripting. At the back, a more pronounced rear undertray, quad exhaust tips and a lip spoiler running across the trunk from taillight to taillight lets those caught in its wake as it rapidly passes by know that this isn’t any ordinary SL.

Prices for the new SL-Class should range between $100,000 (V-8 engine) and $140,000 (V-12-equiiped), with the new SL63 likely slotting in somewhere in between (though most likely closer to the upper echelon).

2009 Lamborghini Gallardo LP560/4

Presented in Geneva, the refreshed Gallardo will come with the designation LP560/4, which describes its beefed-up V-10 (now at 5204 cc) that delivers 560 horsepower (an increase of 40) and its all-wheel drive. Lamborghini claims it will run to 100 km/h (62 mph) in 3.7 seconds, while its top speed will be 6 mph higher, at 202.

The new LP designation, similar to that used on the Murciélago, refers to the engine’s longitudinal and posterior positioning in the car. The engine upgrades, which include direct injection and a flat plane crankshaft, come courtesy of Lamborghini’s parent, Audi AG. Similar technology was employed on the V-10 engine in the Audi RS6 sports sedan.

The revamped Gallardo is also distinguished by styling changes front and rear and new alloy wheels. The front end is more aggressive, with slightly larger intakes. The interior remains virtually unchanged, except for a few new switches on the center console.

The first LP560/4s will arrive in the U.S. in August, alongside the current Superleggera version, which is sold out until spring of 2009. Lambo’s top model—the Murciélago—will remain largely unchanged for the next two years, although a Superveloce version (to be unveiled at the Paris show in October) is expected next year.

Ferrari 612 Scaglietti

Those expecting to see a new entry-level Ferrari at Geneva, possibly called the Dino, were disappointed. But we do hear such a car may be possible at the Paris show later this year. In the meantime, Ferrari unveiled an updated version of its 2+2, the 612 Scaglietti.

Although the exterior appearance remains largely the same, many of the updates are beneath the car’s sexy skin. The new premium GT now comes with a modified F1 semiautomatic gearbox, which features sequential paddle shifters and an automatic clutch. The new setup promises faster upshifts and ear-pleasing throttle-blip downshifts. The steering wheel is also fitted with a revised Manettino switch, which allows the driver to configure the car’s engine output for extra power and the level at which stability - and traction-control systems intervene as well as firmness of the adjustable suspension.

The 612, originally introduced in 2004, rides on a 116.1-in. wheelbase, and its all-aluminum body measures 193.0 inches in overall length. The engine is a 5.7- liter V-12 producing 532 bhp and 434 lb.-ft. of torque. Ferrari claims the 612 is capable of accelerating to 60 mph in just 4.8 seconds. The 2009 Scaglietti will be available late this summer.

1936 Ford Coupe - The One

For Some Guys, It Just Takes The Right Car To Bring Out The Inner Hot Rodder

When you see "your" car for the first time, you just know it. There's a moment of connection when you identify with it followed quickly by the annoying feeling that someone else owns it. That inspirational moment is even more significant when you realize you're neither looking for a project nor are you even aware you're a hot rodder.

That's pretty much how it happened to Ray Dunham, as he strolled through the Donut Derelicts car gathering in Huntington Beach, California, early one Saturday morning about three years ago. Ray had a real appreciation for vintage style, particularly '50s-era cruisers, but it had been a while since he'd built anything. Vintage, two-toned VW Beetles had been his thing in high school until he made the pragmatic choice after graduation to fumigate the Bugs and get a reliable and user-friendly late-model daily driver. But Ray was never satisfied without something to tinker on and eventually picked up a '57 Harley-Davidson. The Panhead satisfied his urges for a while until a friend and fellow biker met an untimely end while riding. Ray's girlfriend was understandably shaken and persuaded him to sell the Harley, and he was once again left without a project.

But that Saturday morning, as Ray was walking among some of the sharpest hot rods in the area, his eyes landed on a beater '36 Ford three-window coupe, and he was awestruck. Ray had no background in vintage cars outside of his VW experience and had to ask someone what it was, but he knew he'd found "his" car. It was initially not for sale, but persistence pays, and eventually, a deal was struck and the '36 was his.

As tends to happen when purchases are made with the heart rather than the head, Ray paid too much for a car that needed a lot of work. The slammed '36 had no suspension travel and scraped the running boards on nearly every dip, rise, or turn. And everything rattled. On top of that, the car's driveability was marginal at best. The brakes were scary, and the tired, near-stock flathead could barely reach cruising speed, typically overheating when it did. It quickly became obvious that Ray had bought a project rather than a driver. He began replacing parts a few at a time, making a list of what was needed as he went, but the further he went and the longer the list got, the more he realized he was simply bandaging the problems. So eventually, he resolved to rebuild the car from scratch.

The most interesting part about this resolution was that Ray had no idea how to correctly build a '36 Ford, or any other hot rod, and he had never been involved with the culture; his slate was as blank as his car's. In retrospect, that was probably for the best. Rather than relying solely upon conventionally styled '30s rods to determine the look for his '36, Ray drew upon his VW past to create a retro but classy appearance that simply suited his style and taste.

Of course, what the eye notices most when it sees the car for the first time is the striking satin-black and gloss-red paint combo. Ray may not have been able to identify the car, but the moment he saw it, he knew it would be two-toned. A little time with a friend and a photo-editing program sealed the deal for the red/black theme. Why satin-finish black rather than gloss? Ray just felt it had more visual impact, plus it gave the '36 a little more traditional hot-rod attitude to balance the low and fender-skirted custom stance.

---

1935 Chevy Master - Robert Wood's '35 Chevy Street Modified

Bitchin'! This car represents the street-rod version of an idea that more people need to latch on to: use circle-track parts to create function and character. The supply of low-buck roundy-round parts is nearly limitless and can be applied liberally for endless twists on the theme. You can build your Camaro, Chevelle, or G-body into a Street Stocker with bolt-ons or go deeper with a fabricated-chassis car like Robert's '35 Chevy Master.

After having a number of predictable street rods, Robert realized he owed a nod to the local NASCAR heritage that abounds nearby his Boones Mill, Virginia, home. It would have been pretty tempting to go with a straight 'shine runner or even a retro jalopy, but instead, an old race-car steel body was dropped off at (dig this) Groundhog Compton's Garage in Martinsville, Virginia, and once the pop-riveted doors were freed up and hammered out, it was treated to a contemporary-style dirt Modified chassis that Groundhog calls his Featherweight. It includes all the standard circle-track parts, such as the fully adjustable, late-model-style control arms and Wilwood's tandem master cylinder and four-wheel disc brakes. The rearend is from an Olds Bravada, which is essentially an S-10 Blazer.

But of course the hook is the endless rubber dominating the chopped-down '35 sheetmetal. Those are Hoosier 29x18.50-15 Pro Street radials mimicking dirt-track rubber on every corner, each engulfing legit circle-track Basset 15x14 steel wheels. Tell us you've seen that before. The theme continues with stuff like the extended S&S headers and exhaust made from Corvette side pipes and the Afco aluminum radiator behind a '35ish grille fabbed by Groundhog. The unchopped roof reminds you of jalopies piling into turn one, and the stock taillights and Harley-Davidson motorcycle-fender lights as front turn signals are nice tchotchke. Guys in Bakersfield: good luck with this one.

Robert wanted a nice driver and must have gotten it, since he's stacked 5,000-plus miles on the car since last June. Contributing to the comfort are power rack-and-pinion steering with a Heidt's adjustable pressure valve and concealed Vintage Air climate control (the condenser is hidden under the trunk so as not to detract from the bare-bones appeal). He says, "My wife thinks it's too loud, but it's about the nicest-riding rod I've had. It's like a go-kart and just draws a big crowd. People always take your picture."

Clean Power with EURO V: Brabus E300 Bluetec

A powerful engine and exemplary environmental friendliness are not mutually exclusive: The motor engineers of BRABUS have developed the BRABUS PowerXtra D6 BLUE performance kit for the new Mercedes E 300 BLUETEC. It boosts power output of the cleanest diesel car on the market by 47 hp / 35 kW. The new BRABUS tuning technology makes BRABUS the first

automobile tuner to meet ultra-stringent EURO V exhaust limits which won’t go into effect until 2011. The Mercedes E 300 BLUETEC with BRABUS PowerXtra D6 BLUE tuning stayed below permissible exhaust limits of EURO V by up to 65 percent.

Powerful and clean tuning for diesel engines is a long BRABUS tradition. The BRABUS E V8 Diesel from 2001 was the first diesel car ever to be equipped with a particulate filter. It met today’s EURO IV emission limits even long before they became law.Using state-of-the-art test-bench technology in the company-own R&D center the BRABUS development team has developed a special auxiliary module for the electronic engine management system of the E 300 BLUETEC. BRABUS mapping is specifically calibrated to the environmentally friendly BLUETEC concept that features an oxidation catalyst, particulate filter and BLUETEC SCR catalyst.

After the conversion operation, which any authorized Mercedes-Benz dealer can perform, the engine produces 258 hp (255 hp SAE net) / 190 kW at 3,700 rpm. The engine’s torque grows by a healthy amount as well: Between 1,600 and 2,400 rpm the torque curve reaches a new high of 610 Nm (450 lb-ft), up from standard 540 Nm (398 lb-ft). Thus powered the BRABUStuned car sprints from rest to 100 km/h (62 mph) in just 6.8 seconds and reaches an electronically limited top speed of 250 km/h (155 mph).

In everyday driving the 3-liter V6 engine with BRABUS D6 BLUE kit harmonizes perfectly with the seven-speed automatic gearbox. The engine delivers excellent performance with even further improved pulling power from low engine speeds, which benefits overall fuel economy. Despite the improved performance fuel consumption remains on the low level of the production car.

The BRABUS PowerXtra D6 BLUE power kit for the E 300 BLUETEC is available for 1,790 Euros MSRP. Like all BRABUS components the kit is backed by the one-of-a-kind BRABUS Tuning Warranty® of three years, up to 100,000 kilometers or 62,000 miles (see BRABUS warranty conditions as of November 2006). BRABUS also offers a power kit for the E320 BLUETEC model available in the USA and Canada.

An efficient complement to the BRABUS D6 BLUE power kit is the BRABUS sport exhaust system with four polished tailpipes. The fully stainless-steel exhaust system lends the common-rail diesel engine a throatier exhaust note and optimizes power yield. To add sporty emphasis to the elegant lines of the W 211-series E-Class the BRABUS designers have developed a sporty aerodynamic-enhancement kit, manufactured from Pur-R-Rim in OEM quality.

BRABUS one-piece and multi-piece light-alloy wheels for the E 300 BLUETEC are available in four different designs and in sizes ranging from 8.5Jx17 to 10.5Jx20. The optimal tires in any size come from technology partners Pirelli and YOKOHAMA, up to the largest possible tire sizes for the E-Class, size 245/30 ZR 20 in front and 295/25 ZR 20 on the rear axle.

Also available for the E-Class sedan are custom-tailored BRABUS suspension solutions such as lowering modules, sporty yet comfortable complete suspensions, a special control module for the optional air suspension, and sport stabilizers that reduce body roll during cornering.

BRABUS high-performance brake systems for the Mercedes E-Class are available in three different versions. Another BRABUS specialty is the creation of luxurious customized interiors. The range of products includes stainless-steel scuff plates with illuminated BRABUS logo, various types of ergonomically shaped sport steering wheels, and even an exclusive BRABUS interior crafted from a combination of especially soft yet durable BRABUS Mastik leather and Alcantara

Volkswagen Jetta TSI Sport Unveiled

Volkswagen’s latest track challenger, a supercharged and turbocharged Jetta saloon, was unveiled today (Thursday) in Britain. The Jetta TSI Sport made its debut at the Autosport International racing car show at Birmingham’s NEC, taking centre stage on the British Racing and Sports Car Club stand. The new machine will take to the track for the first time on Easter Monday (24 March) in the opening round of the Hankook-backed Volkswagen Racing Cup, at Oulton Park.

In road-going form the Jetta’s 1.4-litre, 16-valve engine produces 170 PS but the engineers at Volkswagen Racing UK, with the help of their technology partners at Superchips, Milltek Sport and Turbo Dynamics, have boosted this to 230 PS.

The TSI power unit was proven in competition last season under the bonnet of a Golf; Volkswagen Racing UK’s Melissa Wright believes that the Jetta TSI is a potential race winner: ‘We learned a lot about the engine during the course of 2007 and we have incorporated that knowledge into the new installation,’ she said. ‘In the right hands and with some development mileage under it, the new car will be a front-runner, I am sure.’

The TSI features an engine-driven supercharger and an exhaust gas powered turbocharger, arranged in series; the supercharger operates at lower engine speeds and the turbo cuts in as revs rise. The result is excellent driveability and performance throughout the rev range, with no turbo lag and high maximum torque.

It’s not only in Britain that the Jetta will be cutting a dash this season – the Sports Car Club of America is to stage a championship for turbodiesel-powered machines. The Jetta TDI Cup will launch in May.

In the UK, the Jetta TSI Sport will be raced by selected motoring and motor sport journalists. The Volkswagen Racing Cup expands to 14 rounds this year and will once again be the chief saloon-race support to the British Formula 3 and British GT Championships.

The Volkswagen Racing Cup in association with Hankook is further supported by Augustus Martin, Castrol, ECM Vehicle Delivery, Milltek Sport, Mondial Assistance, KW Automotive, Superchips, TNT Logistics, Turbo Dynamics, Volkswagen Commercial Vehicles and Volkswagen Financial Services UK.